Frequently Asked Questions

Apache Process Crashes

Q: When the mod_wsgi module is initially being loaded by Apache, why does the Apache server processes crash with a ‘segmentation fault’?

A: This is nearly always caused due to mod_python also being loaded by Apache at the same time as mod_wsgi and the Python installation not providing a shared library, or mod_python having originally being built against a static Python library. This is especially a problem with older Linux distributions before they started shipping with Python as a shared library.

Further information on these problems can be found in various sections of [Installation Issues].

Q: When the first request is made against a WSGI application, why does the Apache server process handling the request crash with a ‘segmentation fault’?

A: This is nearly always caused due to a shared library version conflict. That is, Apache or some Apache module is linked against a different version of a library than that which is being used by a particular Python module that the WSGI application makes use of. The most common culprits are the expat and MySQL libraries, but it can also occur with other shared libraries.

Another cause of a process crash only upon the first request can be a third party C extension module for Python which has not been implemented so as to work within a secondary Python sub interpreter. The Python bindings for Subversion are a particular example, with the Python module only working correctly if the WSGI application is forced to run within the first interpreter instance created by Python.

Further information on these problems can be found in various sections of Application Issues. The problems with the expat library are also gone into in more detail in Issues With Expat Library.

Q: Why am I seeing the error message ‘premature end of script headers’ in the Apache error logs.

A: If using daemon mode, this is a symptom of the mod_wsgi daemon process crashing when handling a request. You would probably also see the message ‘segmentation fault’. See answer for question about ‘segmentation fault’ above.

This error message can also occur where you haven’t configured Apache correctly and your WSGI script file is being executed as a CGI script instead.

HTTP Error Responses

Q: When I try to use mod_wsgi daemon mode I get the error response ‘503 Service Temporarily Unavailable’.

A: The standard Apache runtime directory has restricted access and the Apache child process cannot access the daemon process sockets. You will need to use the WSGISocketPrefix directive to specify an alternative location for storing of runtime files such as sockets.

For further information see section ‘Location Of UNIX Sockets’ of [Configuration Issues].

Q: I am getting a HTTP 500 error response and I can’t find any error in the Apache error logs.

A: Some users of mod_wsgi 1.3/2.0 and older minor revisions, are finding that mod_wsgi error messages are going missing, or ending up in the main Apache error log file rather than a virtual host specific error log file. Specifically, this is occurring when Apache ErrorLog directive is being used inside of a VirtualHost container.

It is not known exactly what operating system setup and/or Apache configuration is the trigger for this problem. To avoid the problem, use a newer version of mod_wsgi.

HTTP Error Log Messages

Q: Why do I get the error ‘IOError: client connection closed’ appearing in the error logs?

A: This occurs when the HTTP client making the request closes the connection before the complete response for a request has been written.

This can occur where a user force reloads a web page before it had been completely displayed. It can also occur when using benchmarking tools such as ‘ab’ as they will over commit on the number of requests they make when doing concurrent requests, killing off any extra requests once the required number has been reached.

In general this error message can be ignored.

Application Reloading

Q: Do I have to restart Apache every time I make a change to the Python code for my WSGI application?

A: If your WSGI application is contained totally within the WSGI script file and it is that file that you are changing, then no you don’t. In this case the WSGI script file will be automatically reloaded when a change is made provided that script reloading hasn’t been disabled.

If the code you are changing lies outside of the WSGI script file then what you may need to do will depend on how mod_wsgi is being used.

If embedded mode of mod_wsgi is being used, the only option is to restart Apache. You could set Apache configuration directive MaxRequestsPerChild to 1 to force a reload of the application on every request, but this is not recommended because it will perform as bad as or as worse as CGI and will also affect serving up of static files and other applications being hosted by the same Apache instance.

If using daemon mode with a single process you can send a SIGINT signal to the daemon process using the ‘kill’ command, or have the application send the signal to itself when a specific URL is triggered.

If using daemon mode, with any number of processes, and the process reload mechanism of mod_wsgi 2.0 has been enabled, then all you need to do is touch the WSGI script file, thereby updating its modification time, and the daemon processes will automatically shutdown and restart the next time they receive a request.

Use of daemon mode and the process reload mechanism is the preferred mechanism for handling automatic reloading of code after changes.

More details on how source code reloading works with mod_wsgi can be found in Reloading Source Code.

Q: Why do requests against my application seem to take forever, but then after a bit they all run much quicker?

A: This is because mod_wsgi by default performs lazy loading of any application. That is, an application is only loaded the first time that a request arrives which targets that WSGI application. This means that those initial requests will incur the overhead of loading all the application code and performing any startup initialisation.

This startup overhead can appear to be quite significant, especially if using Apache prefork MPM and embedded mode. This is because the startup cost is incurred for each process and with prefork MPM there are typically a lot more processes that if using worker MPM or mod_wsgi daemon mode. Thus, as many requests as there are processes will run slowly and everything will only run full speed once code has all been loaded.

Note that if recycling of Apache child processes or mod_wsgi daemon processes after a set number of requests is enabled, or for embedded mode Apache decides itself to reap any of the child processes, then you can periodically see these delayed requests occurring.

Some number of the benchmarks for mod_wsgi which have been posted do not take into mind these start up costs and wrongly try to compare the results to other systems such as fastcgi or proxy based systems where the application code would be preloaded by default. As a result mod_wsgi is painted in a worse light than is reality. If mod_wsgi is configured correctly the results would be better than is shown by those benchmarks.

For some cases, such as when WSGIScriptAlias is being used, it is actually possible to preload the application code when the processes first starts, rather than when the first request arrives. To preload an application see the WSGIImportScript directive.

By preloading the application code you would not normally see delays in requests being handled. The only exception to this would be when running a single process under mod_wsgi daemon mode and the process is being restarted when a maximum number of requests arrives or explicitly via one of the means to trigger reloading of application code. Delays here can be avoided by running at least two processes in the daemon process group. This is because when one process is restarting, the others can handle the requests.

Execution Environment

Q: Why do I get the error ‘IOError: sys.stdout access restricted by mod_wsgi’?

A: A portable WSGI application or application component should not output anything to standard output. This is because some WSGI hosting mechanisms use standard output to communicate with the web server. If a WSGI application outputs anything to standard output it will thus potentially interleave with the response sent back to the client.

To promote portability of WSGI applications, mod_wsgi by default restricts direct use of ‘sys.stdout’ and ‘sys.stdin’. Because the ‘print’ statement defaults to outputing text to ‘sys.stdout’, using ‘print’ for debugging purposes can cause this error.

For more details about this issue, including how applications should do logging and how to disable this restriction see section ‘Writing To Standard Output’ in Application Issues and section ‘Apache Error Log Files’ in Debugging Techniques.

Q: Can mod_wsgi be used with Python virtual environments created using Ian Bicking’s ‘virtualenv’ package?

A: Yes. For more details see Virtual Environments.

Access Control Mechanisms

Q: Why are client user credentials not being passed through to the WSGI application in the ‘HTTP_AUTHORIZATION’ variable of the WSGI environment?

A: User credentials are not passed by default as doing so is insecure and could expose a users password to WSGI applications which shouldn’t be permitted to see it. Such a situation might occur within a corporate setting where HTTP authentication mechanisms were used to control access to a corporate web server but it was possible for users to provide their own web pages. The last thing a system administator will want is normal users being able to see other users passwords.

As a result, the passing of HTTP authentication credentials must be explicitly enabled by the web server administrator. This can only be done using directives placed in the main Apache confguration file.

For further information see Access Control Mechanisms and the documentation for the WSGIPassAuthorization directive.

Q: Is there a way of having a WSGI application provide user authentication for resources outside of the application such as static files, CGI scripts or even a distinct application? In other words, something akin to being able to define access, authentication and authorisation handlers in mod_python.

A: Provided you are using Apache 2.0 or later, version 2.0 of mod_wsgi provides support for hooking into the Apache access, authentication and authorisation handler phases. This doesn’t allow full control of how the Apache handler is implemented, but does allow control over how user credentials are validated, determination of what groups a user is a member of and whether specific hosts are allowed access. This is generally more than sufficient and makes the task somewhat simpler than needing to implement a full handler like in mod_python as Apache and mod_wsgi do all the hard work.

For further information see Access Control Mechanisms.