Checking Your Installation

When debugging mod_wsgi or a WSGI application, it is import to be able to understand how mod_wsgi has been installed, what Apache and/or Python it uses and how those systems have been configured, plus under what configuration the WSGI application is running.

This document details various such checks that can be made. The primary purpose of providing this information is so that when people ask questions on the mod_wsgi mailing list, they can be directed here to perform certain checks as a way of collecting additional information needed to help debug their problem.

If you are reading this document because you have been directed here from the mailing list, then ensure that you actually provide the full amount of detail obtained from the checks and not leave out information. When you leave out information then it means guesses have to be made about your setup which makes it harder to debug your problems.

Apache Build Information

Information related to what version of Apache is being used and how it is built is obtained in a number of ways. The primary means is from the Apache ‘httpd’ executable itself using command line options. The main such option is the -V option.

On most systems the standard Apache executable supplied with the operating system is located at ‘/usr/sbin/httpd’. On MacOS X, for the operating system supplied Apache the output from this is:

$ /usr/sbin/httpd -V
Server version: Apache/2.2.14 (Unix)
Server built:   Feb 10 2010 22:22:39
Server's Module Magic Number: 20051115:23
Server loaded:  APR 1.3.8, APR-Util 1.3.9
Compiled using: APR 1.3.8, APR-Util 1.3.9
Architecture:   64-bit
Server MPM:     Prefork
  threaded:     no
    forked:     yes (variable process count)
Server compiled with....
 -D APACHE_MPM_DIR="server/mpm/prefork"
 -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
 -D HTTPD_ROOT="/usr"
 -D SUEXEC_BIN="/usr/bin/suexec"
 -D DEFAULT_PIDLOG="/private/var/run/"
 -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
 -D DEFAULT_LOCKFILE="/private/var/run/accept.lock"
 -D DEFAULT_ERRORLOG="logs/error_log"
 -D AP_TYPES_CONFIG_FILE="/private/etc/apache2/mime.types"
 -D SERVER_CONFIG_FILE="/private/etc/apache2/httpd.conf"

The most important details here are:

  • The version of Apache from the ‘Server version’ entry.

  • The MPM which Apache has been compiled to use from the ‘Server MPM’ entry.

Although this has a section which appears to indicate what preprocessor options the server was compiled with, it is a massaged list. What is often more useful is the actual arguments which were supplied to the ‘configure’ command when Apache was built.

To determine this information you need to do the following.

  • Work out where ‘apxs2’ or ‘apxs’ is installed.

  • Open this file and find setting for ‘$installbuilddir’.

  • Open the ‘config.nice’ file in the directory specified for build directory.

On MacOS X, for the operating system supplied Apache this file is located at ‘/usr/share/httpd/build/config.nice’. The contents of the file is:

#! /bin/sh
# Created by configure

"/SourceCache/apache/apache-747.1/httpd/configure" \
"--prefix=/usr" \
"--enable-layout=Darwin" \
"--with-apr=/usr" \
"--with-apr-util=/usr" \
"--with-pcre=/usr/local/bin/pcre-config" \
"--enable-mods-shared=all" \
"--enable-ssl" \
"--enable-cache" \
"--enable-mem-cache" \
"--enable-proxy-balancer" \
"--enable-proxy" \
"--enable-proxy-http" \
"--enable-disk-cache" \

Not only does this indicate what features of Apache have been compiled in, it also indicates by way of the --enable-layout option what custom Apache installation layout has been used.

Apache Modules Loaded

Modules can be loaded into Apache statically, or can be loaded dynamically at run time based on Apache configuration files.

If modules have been statically compiled into Apache, usually it would be evident by what ‘configure’ arguments have been used when Apache was built. To verify exactly what is compiled statically, you can use the -l option to the Apache executable.

On MacOS X, for the operating system supplied Apache the output from running -l option is:

$ /usr/sbin/httpd -l
Compiled in modules:

This indicates that the only module that is loaded statically is ‘mod_so’. This is actually the Apache module that handles the task of dynamically loading other Apache modules.

For a specific Apache configuration, you can determine what Apache modules will be loaded dynamically by using the -M option for the Apache executable.

On MacOS X, for the operating system supplied Apache the output from running -M option, where the only additional module added is mod_wsgi, is:

$ /usr/sbin/httpd -M
Loaded Modules:
 core_module (static)
 mpm_prefork_module (static)
 http_module (static)
 so_module (static)
 authn_file_module (shared)
 authn_dbm_module (shared)
 authn_anon_module (shared)
 authn_dbd_module (shared)
 authn_default_module (shared)
 authz_host_module (shared)
 authz_groupfile_module (shared)
 authz_user_module (shared)
 authz_dbm_module (shared)
 authz_owner_module (shared)
 authz_default_module (shared)
 auth_basic_module (shared)
 auth_digest_module (shared)
 cache_module (shared)
 disk_cache_module (shared)
 mem_cache_module (shared)
 dbd_module (shared)
 dumpio_module (shared)
 ext_filter_module (shared)
 include_module (shared)
 filter_module (shared)
 substitute_module (shared)
 deflate_module (shared)
 log_config_module (shared)
 log_forensic_module (shared)
 logio_module (shared)
 env_module (shared)
 mime_magic_module (shared)
 cern_meta_module (shared)
 expires_module (shared)
 headers_module (shared)
 ident_module (shared)
 usertrack_module (shared)
 setenvif_module (shared)
 version_module (shared)
 proxy_module (shared)
 proxy_connect_module (shared)
 proxy_ftp_module (shared)
 proxy_http_module (shared)
 proxy_ajp_module (shared)
 proxy_balancer_module (shared)
 ssl_module (shared)
 mime_module (shared)
 dav_module (shared)
 status_module (shared)
 autoindex_module (shared)
 asis_module (shared)
 info_module (shared)
 cgi_module (shared)
 dav_fs_module (shared)
 vhost_alias_module (shared)
 negotiation_module (shared)
 dir_module (shared)
 imagemap_module (shared)
 actions_module (shared)
 speling_module (shared)
 userdir_module (shared)
 alias_module (shared)
 rewrite_module (shared)
 bonjour_module (shared)
 wsgi_module (shared)
Syntax OK

The names reflect that which would have been used with the LoadModule line in the Apache configuration and not the name of the module file itself.

The order in which modules are listed can be important in some cases where a module doesn’t explicitly designate in what order a handler should be applied relative to other Apache modules.

Global Accept Mutex

Because Apache is a multi process server, it needs to use a global cross process mutex to control which of the Apache child processes get the next chance to accept a connection from a HTTP client.

This cross process mutex can be implemented using a variety of different mechanisms and exactly which is used can vary based on the operating system. Which mechanism is used can also be overridden in the Apache configuration if absolutely required.

A simlar instance of a cross process mutex is also used for each mod_wsgi daemon process group to mediate which process in the daemon process group gets to accept the next request proxied to that daemon process group via the Apache child processes.

The list of mechanisms which might be used to implement the cross process mutex are as follows:

  • flock

  • fcntl

  • sysvsem

  • posixsem

  • pthread

In the event that there are issues which communicating between the Apache child processes and the mod_wsgi daemon process in particular, it can be useful to know what mechanism is used to implement the cross process mutex.

By default, the Apache configuration files would not specify a specific mechanism, and instead which is used would be automatically selected by the underlying Apache runtime libraries based on various build time and system checks about what is the prefered mechanism for a particular operating system.

Which mechanism is used by default can be determined from the build information displayed by the -V option to the Apache executable described previously. The particular entries of interest are those with ‘SERIALIZE’ in the name of the macro.

On MacOS X, using operating system supplied Apache, the entries of interest are:


As the entries are used in order, what this indicates is that Apache will by default use the ‘flock’ mechanism to implement the cross process mutex.

In comparison, on a Linux system, the entries of interest may be:


which indicates that ‘sysvsem’ mechanism is instead used.

This mechanism is also what would be used by mod_wsgi by default as well for the cross process mutex for daemon process groups.

This mechanism will be different where the AcceptMutex and WSGIAcceptMutex directives are used.

If the AcceptMutex directive is defined in the Apache configuration file, then what ever mechanism is specified will be used instead for Apache child processes. Provided that Apache 2.2 or older is used, and WSGIAcceptMutex is not specified, then when AcceptMutex is used, that will also then be used by mod_wsgi daemon processes as well.

In the case of Apache 2.4 and later, AcceptMutex will no longer override the default for mod_wsgi daemon process groups, and instead WSGIAcceptMutex must be specified seperately if it needs to be overridden for both.

Either way, you should check the Apache configuration files as to whether either AcceptMutex or WSGIAcceptMutex directives are used as they will override the defaults calculated above. Under normal circumstances neither should be set as default would always be used.

If wanting to look at overriding the default mechanism, what options exist for what mechanism can be used will be dependent on the operating system being used. There are a couple of ways this can be determined.

The first is to find the ‘apr.h’ header file from the Apache runtime library installation that Apache was compiled against. In that you will find entries similar to the ‘USE’ macros above. You will also find ‘HAS’ entries. In this case we are interested in the ‘HAS’ entries.

On MacOS X, with the operating system supplied APR library, the entries in ‘apr.h’ are:

#define APR_HAS_FLOCK_SERIALIZE           1
#define APR_HAS_FCNTL_SERIALIZE           1

The available mechanisms are those defined to be ‘1’.

Finding where the right ‘apr.h’ is located may be tricky, so an easier way is to trick Apache into generating an error message to list what the available mechanisms are. To do this, in turn, add entries into the Apache configuration files, at global scope of:

AcceptMutex xxx


WSGIAcceptMutex xxx

For each run the -t option on the Apache program executable.

On MacOS X, with the operating system supplied APR library, this yields:

$ /usr/sbin/httpd -t
Syntax error on line 501 of /private/etc/apache2/httpd.conf:
xxx is an invalid mutex mechanism; Valid accept mutexes for this platform \
 and MPM are: default, flock, fcntl, sysvsem, posixsem.

for AcceptMutex and for WSGIAcceptMutex:

$ /usr/sbin/httpd -t
Syntax error on line 501 of /private/etc/apache2/httpd.conf:
Accept mutex lock mechanism 'xxx' is invalid. Valid accept mutex mechanisms \
 for this platform are: default, flock, fcntl, sysvsem, posixsem.

The list of available mechanisms should normally be the same in both cases.

Using the value of ‘default’ indicates that which mechanism is used is left up to the APR library.

Python Shared Library

When mod_wsgi is built, the ‘’ file should be linked against Python via a shared library. If it isn’t and it is linked against a static library, various issues can arise. These include additional memory usage, plus conflicts with mod_python if it is also loaded in same Apache.

To validate that ‘’ is using a shared library for Python, on most UNIX systems the ‘ldd’ command is used. For example:

$ ldd =>  (0x00007fffeb3fe000) => /usr/local/lib/ (0x00002adebf94d000) => /lib/ (0x00002adebfcba000) => /lib/ (0x00002adebfed6000) => /lib/ (0x00002adec00da000) => /lib/ (0x00002adec02dd000) => /lib/ (0x00002adec0635000)
 /lib64/ (0x0000555555554000)

What you want to see is a reference to an instance of ‘’. Normally the operating system shared library version suffix would always be ‘1.0’. What it is shouldn’t really matter though.

This reference should refer to the actual Python shared library for your Python installation.

Do note though, that ‘ldd’ will take into consideration any local user setting of the ‘LD_LIBRARY_PATH’ environment variable. That is, ‘ldd’ will also search any directories listed in that environment variable for shared libraries.

Although that environment variable may be defined in your user account, it will not normally be defined in the environment of the account that Apache starts up as. Thus, it is important that you unset the ‘LD_LIBRARY_PATH’ environment variable when running ‘ldd’.

If you run the check with and without ‘LD_LIBRARY_PATH’ set and find that without it that a different, or no Python shared library is found, then you will likely have a problem. For the case of it not being found, Apache will fail to start. For where it is found but it is a different installation to that which you want used, subtle problems could occur due to C extension modules for Python being used which were compiled against that installation.

For example, if ‘LD_LIBRARY_PATH’ contained the directory ‘/usr/local/lib’ and you obtained the results above, but when you unset it, it picked up shared library from ‘/usr/lib’ instead, then you may end up with problems if for a different installation. In this case you would see:

$ ldd =>  (0x00007fffeb3fe000) => /usr/lib/ (0x00002adebf94d000) => /lib/ (0x00002adebfcba000) => /lib/ (0x00002adebfed6000) => /lib/ (0x00002adec00da000) => /lib/ (0x00002adec02dd000) => /lib/ (0x00002adec0635000)
 /lib64/ (0x0000555555554000)

Similarly, if not found at all, you would see:

$ ldd =>  (0x00007fffeb3fe000) => not found => /lib/ (0x00002adebfcba000) => /lib/ (0x00002adebfed6000) => /lib/ (0x00002adec00da000) => /lib/ (0x00002adec02dd000) => /lib/ (0x00002adec0635000)
 /lib64/ (0x0000555555554000)

If you have this problem, then it would be necessary to set ‘LD_RUN_PATH’ environment variable to include directory containing where Python library resides when building mod_wsgi, or set ‘LD_LIBRARY_PATH’ in startup file for Apache such that it is also set for Apache when run. For standard Apache installation the latter would be done in ‘envvars’ file in same directory as Apache program executable. For some Linux installations would need to be done in init scripts for Apache.

Note that MacOS X doesn’t use ‘LD_LIBRARY_PATH’ nor have ‘ldd’. On MacOS X, instead of ‘ldd’ you can use ‘otool -L’:

$ otool -L
  /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
  /System/Library/Frameworks/Python.framework/Versions/2.6/Python (compatibility version 2.6.0, current version 2.6.1)

If using standard MacOS X compilers and not using Fink or !MacPorts, there generally should not ever be any issues with whether it is a shared library or not as everything should just work.

The only issue with MacOS X is that for whatever reason, the location dependency for the shared library (framework) isn’t always encoded into ‘’ correctly. This seems to vary between what Python installation was used and what MacOS X operating system version. In this case, if multiple installations of same version of Python in different locations, may find the system installation rather than your custom installation.

In that situation you may need to use the --disable-framework option to ‘configure’ script for mod_wsgi. This doesn’t actually disable use of the framework, but does change how it links to use a more traditional library style linking rather than framework linking. This seems to resolve the problems in most cases.

Python Installation In Use

Although the ‘’ file may be finding a specific Python shared library and that may be from the correct installation, the Python library when initialised doesn’t actually know from where it came. As such, it uses a series of checks to try and determine where the Python installation is actually located.

This check has various subtleties and how it works varies depending on the platform used. At its simplest though, on most UNIX systems it will check all directories listed in the ‘PATH’ environment variable of the process. In each of those directories it will look for the ‘python’ program. When it finds such a file, it will then look for a corresponding ‘lib’ directory containing a valid Python installation for the same version of Python as is being run.

When it finds such a directory, the home for the Python installation will be taken as being the parent directory of the directory containing the ‘python’ program file found.

Because this search is dependent on the ‘PATH’ environment variable, which is likely set to a minimal set of directories for the Apache user, then if you are using a Python installation in a non standard location, then it may not properly find the location of that installation.

The easiest way to validate which Python installation is being used is to use a test WSGI script to output the value of ‘sys.prefix’:

import sys

def application(environ, start_response):
    status = '200 OK'

    output = u''
    output += u'sys.version = %s\n' % repr(sys.version)
    output += u'sys.prefix = %s\n' % repr(sys.prefix)

    response_headers = [('Content-type', 'text/plain'),
                        ('Content-Length', str(len(output)))]
    start_response(status, response_headers)

    return [output.encode('UTF-8')]

For standard Python installation on a Linux system, this would produce something like:

sys.version = "'2.6.1 (r261:67515, Feb 11 2010, 00:51:29) \\n[GCC 4.2.1 (Apple Inc. build 5646)]'"
sys.prefix = '/usr'

Thus, if you were expecting to pick up a separate Python installation located under ‘/usr/local’ or elsewhere, this would be indicative of a problem.

It can also be worthwhile to check that the Python module search path also looks correct. This can be done by using a test WSGI script to output the value of ‘sys.path’:

import sys

def application(environ, start_response):
    status = '200 OK'
    output = u'sys.path = %s' % repr(sys.path)

    response_headers = [('Content-type', 'text/plain'),
                        ('Content-Length', str(len(output)))]
    start_response(status, response_headers)

    return [output.encode('UTF-8')]

In both cases, even if incorrect location is being used for Python installation and even if there is no actual Python installation of the correct version under that root directory, then these test scripts should still run as ‘sys’ module is a builtin module which can be satisified via just the Python library.

If debugging, whether there is a Python installation underneath that root directory, the subdirectory which you would want to look for is ‘lib/pythonX.Y’ corresponding to version of Python being used.

If the calculated directory is wrong, then you will need to use the WSGIPythonHome directory to set the location to the correct value. The value to use is what ‘sys.prefix’ is set to when the correct Python is run from the command line and ‘sys.prefix’ output:

>>> import sys
>>> print sys.prefix

Thus for case where installed under ‘/usr/local’, would use:

WSGIPythonHome /usr/local

Embedded Or Daemon Mode

WSGI applications can run in either embedded mode or daemon mode. In the case of embedded mode, the WSGI application runs within the Apache child processes themselves. In the case of daemon mode, they run within a separate set of processes managed by mod_wsgi.

To determine what mode a WSGI application is running under, replace its WSGI script with the test WSGI script as follows:

import sys

def application(environ, start_response):
    status = '200 OK'
    output = u'mod_wsgi.process_group = %s' % repr(environ['mod_wsgi.process_group'])
    response_headers = [('Content-type', 'text/plain'),
                        ('Content-Length', str(len(output)))]
    start_response(status, response_headers)

    return [output.encode('UTF-8')]

If the configuration is such that the WSGI application is running in embedded mode, then you will see:

mod_wsgi.process_group = ''

This actually corresponds to the directive:

WSGIProcessGroup %{GLOBAL}

having being used, or the same value being used to the ‘process-group’ directive of WSGIScriptAlias. Do note though that these are also actually the defaults for these if not explicitly defined.

If the WSGI application is actually running in daemon mode, then a non empty string will instead be shown corresponding to the name of the daemon process group used.

Sub Interpreter Being Used

As well as WSGI application being able to be delegated to run in either embedded mode or daemon mode, within the process it ends up running in, it can be delegated to a specific Python sub interpreter.

To determine which Python sub interpreter is being used within the process the WSGI application is being run use the test WSGI script of:

import sys

def application(environ, start_response):
    status = '200 OK'
    output = u'mod_wsgi.application_group = %s' % repr(environ['mod_wsgi.application_group'])

    response_headers = [('Content-type', 'text/plain'),
                        ('Content-Length', str(len(output)))]
    start_response(status, response_headers)

    return [output.encode('UTF-8')]

If being run in the main interpreter, ie., the first interpreter created by Python, this will output:

mod_wsgi.application_group = ''

This actually corresponds to the directive:

WSGIApplicationGroup %{GLOBAL}

having being used, or the same value being used to the ‘application-group’ directive of WSGIScriptAlias.

The default for these if not defined is actually ‘%{RESOURCE}’. This will be a value made up from the name of the virtual host or server, the port on which connection was accepted and the mount point of the WSGI application. The port however is actually dropped where port is 80 or 443.

An example of what you would expect to see is:

mod_wsgi.application_group = '|/interpreter.wsgi'

This corresponds to server name of ‘’ with connection received on either port 80 or 443 and where WSGI application was mounted at the URL of ‘/interpreter.wsgi’.

Single Or Multi Threaded

Apache supports differing Multiprocessing Modules (MPMs) having different attributes. One such difference is whether a specific Apache child process uses multiple threads for handling requests or whether a single thread is instead used.

Depending on how you configure a daemon process group when using daemon mode will also dictate whether single or multithreaded. By default, if number of threads is not explicitly specified for a daemon process group, it will be multithreaded.

Whether a WSGI application is executing within a multithreaded environment is important to know. If it is, then you need to ensure that your own code and any framework you are using is also thread safe.

A test WSGI script for validating whether WSGI application running in multithread configuration is as follows:

import sys

def application(environ, start_response):
    status = '200 OK'
    output = u'wsgi.multithread = %s' % repr(environ['wsgi.multithread'])

    response_headers = [('Content-type', 'text/plain'),
                        ('Content-Length', str(len(output)))]
    start_response(status, response_headers)

    return [output.encode('UTF-8')]

If multithreaded, this will yield:

wsgi.multithread = True

Multithreaded would usually be true on Windows, on UNIX if running in embedded mode and worker MPM is used by Apache, or if using daemon mode and number of threads not explicitly set, or number of threads explicitly set to value other than ‘1’.